Search: “spine attack”

The Neck Lock family covers joint lock submissions that target the cervical spine through cranking, twisting, or compressing the neck beyond its normal range of motion — among the most dangerous and c...

The rear neck crank from back without hooks is a cervical-spine submission applied from a partial back position — chest-to-back contact established, but no hooks or body triangle. [1] Rather than rely...

Spine locks target the vertebral column — cervical, thoracic, or lumbar spine — by applying compression, torsion, or hyperextension forces to the spinal segments. [1,2] These are among the most danger...

The Jiu-Claw is a 10th Planet Jiu-Jitsu submission from rubber guard where the attacker grips the opponent's face with an open-hand claw grip while the legs control posture, creating a combination fac...

The Twister Side Control subfamily covers the side control variation specific to the 10th Planet Jiu-Jitsu system, where the top fighter sets up the twister submission (a spinal lock) from a modified ...

Cranks and twists are submission techniques that apply rotational or torsional force to a body segment — most commonly the neck (neck cranks) or the arm — forcing the structure beyond its natural rota...

The Standard Rear Body Lock positions the attacker behind the opponent with arms locked around the waist, hands clasped with a Gable grip, S-grip, or butterfly grip. [1] The attacker presses their che...

The twister from back ride is applied when the attacker has a back ride position with one hook controlling the opponent's far leg (the 'truck' entry) and threads an arm under the opponent's chin from ...

The Posture Guillotine Escape uses postural adjustment to relieve the choking pressure of the guillotine by extending the spine and lifting the chin line above the attacker's choking arm. [1] The defe...

Spine compression locks from the clinch apply axial or lateral compression to the spinal column while standing in a clinch position. [1,2] The attacker uses body lock, overhook, or head control to fol...

The Rear Neck Crank From Back Without Hooks is a neck crank submission applied from a back-control position where the attacker does not have hooks (feet inside the opponent's thighs) — instead maintai...

The stack-through can opener combines the traditional can opener neck crank with a stacking guard pass, driving the opponent's knees toward their face while cranking the neck in flexion. [1] From clos...

The Posture Defence subfamily covers choke defensive techniques that use body positioning and postural alignment to prevent the opponent from applying choking pressure. [1] Posture defence addresses t...

The standard twister from truck is the signature cervical rotation submission of the 10th Planet Jiu-Jitsu system, applied from the truck position by rotating the opponent's spine along its longitudin...

The Standard Two-On-One Snap executes the fundamental two-on-one snap down where the attacker, controlling the opponent's arm with both hands, pulls the arm sharply downward while stepping back, break...

The Triangle Escape subfamily covers techniques for escaping the sankaku-jime (triangle choke), where the attacker uses the legs to form a triangle around the defender's head and one arm, creating a s...

The Crossface Control subfamily covers clinch positions where the attacker drives a forearm across the opponent's face or jaw to turn the head and control posture, while maintaining arm or body contro...

The Bob And Weave subfamily covers the defensive technique where the fighter bends at the knees and waist to drop below an incoming horizontal strike (the bob), then moves laterally while rising back ...

The Posture Triangle Escape uses postural alignment to relieve the choking pressure of the triangle by straightening the spine, lifting the trapped shoulder, and creating distance between the defender...

The cradle neck crank from turtle is applied against a turtled opponent by the attacker reaching around the head and under a leg to lock a cradle grip, then rolling the opponent onto their back while ...

Cervical extension cranks force the opponent's head backward, hyperextending the cervical spine. [1,2] The can opener (from inside closed guard) is the most common example — the attacker clasps hands ...

Joint locks are submission techniques that isolate a joint — elbow, shoulder, knee, ankle, hip, wrist, or spine — and apply force to hyperextend, hyperrotate, or compress it beyond its anatomical rang...

The short-lever chin strap flexion applies cervical flexion cranking from front headlock using a short lever arm — the attacker's hands grip directly on the chin or jaw, applying downward force at min...

The nelson neck crank from turtle is applied against a turtled opponent by the attacker threading a half-nelson or full-nelson grip behind the opponent's neck and cranking the head forward while maint...

The twister is a cervical rotation crank that applies extreme lateral rotation and flexion to the spine by trapping the opponent's legs (via a lockdown or leg entanglement) while cranking the head in ...

The jaw pry face crank from rear mount uses the fingers or hands to pry the opponent's jaw open and to the side, creating cervical rotation stress and intense mandibular pain. [1] From rear mount, the...

Hiji Oroshi Uchi is a descending elbow strike delivered vertically downward onto the opponent, using gravity and body weight to amplify the impact. [1] The attacker raises the elbow above the target a...

The face crank applies pressure across the opponent's face — typically the chin, jaw, or nose — to force cervical hyperextension and create intense pain. [1,2,3] The attacker clasps hands under or acr...

The crossface face crank from crucifix uses the crossface forearm to drive across the opponent's face while the crucifix position traps both arms, preventing any defensive action. [1] The attacker con...

The Peruvian necktie from front headlock with shin across the neck is the standard application of this technique, where the attacker holds a front headlock and swings one leg over the opponent's head,...

Standard Spinal Twist Defence works to keep the shoulders and hips aligned, preventing the opponent from creating the rotational separation needed for spinal twist submissions. [1] The defender focuse...

The chin strap neck crank from front headlock uses a cupping grip under the opponent's chin from the front headlock position, then drives the chin upward and sideways to create rotational and extensio...

Arm cranks apply rotational or torsional force along the axis of the arm — twisting the humerus, forearm, or both in ways that stress the shoulder capsule, elbow ligaments, and surrounding musculature...

The body-triangle extension combines body triangle back control with a cervical extension crank, using the body triangle's hip compression as an anchor while the arms drive the head backward. [1] The ...

Standard Posture Defence maintains an upright spine with the head high, chest lifted, and hips forward, creating an aligned body position that prevents the opponent from breaking the defender down for...

The cradle neck crank combines a wrestling cradle — where the attacker links the opponent's head and leg together — with cervical flexion pressure. [1,2,3] The attacker clasps hands connecting the hea...

The face crank from crucifix is applied when the attacker has secured the crucifix position — trapping one of the opponent's arms with the legs (typically the far arm threaded between the legs) while ...

Cervical rotation cranks twist the head laterally, applying torsional force to the cervical vertebrae. [1,2] The twister is the most well-known example: from back control, the attacker traps a leg, co...

The three-quarter nelson crank from turtle applies a nelson variant where the attacker controls approximately three-quarters of the neck-cranking pathway — more than a half nelson but less than a full...

The can opener is a cervical flexion crank applied from inside the opponent's closed guard by clasping both hands behind the opponent's head and forcefully driving the chin toward the chest. [1,2,3] T...

The crossface cradle from side control combines a crossface forearm drive with a cradle leg hook to fold the opponent in half, generating extreme cervical flexion stress. [1] The attacker drives the c...

The twister from truck is applied from the 'truck' position, where the attacker controls the opponent's far leg by threading their own legs through in a lockdown-style configuration while positioned b...

Submissions are techniques that force an opponent to concede defeat — typically by tapping out — through the application of joint locks, chokes, strangles, cranks, compression locks, or pain complianc...

The figure-four clamp finish for the twister from truck uses a figure-four leg configuration to lock the opponent's legs in place while applying the rotational neck crank. [1] From the truck position ...

The Nelson neck crank uses a half-nelson or full-nelson position to drive the opponent's chin toward their chest (flexion) or force the head sideways, creating cervical spine pressure. [1,2] In the fu...

Standard Neck Crank Defence involves immediately aligning the spine by tucking the chin and turning the body to face the same direction as the force being applied, reducing the rotational angle on the...

The wrist-over-crown flexion places the attacker's wrist over the crown (top) of the opponent's head from a front headlock position, then drives downward to force extreme cervical flexion. [1] The wri...