Can You Use a Single-Handed Sword with TWO Hands?
0
Standard Military Sabre Cut·Skallagrim
If you're tired of bad posture at your regular old desk, try an adjustable electric model from Anthrodesk: https://www.a…
Перевод: standard military sabre cut
Дистанция и классификация
Дистанция
БлижняяСредняяДальняя
Обзор
The Standard Military Sabre Cut delivers the curved blade's edge in a powerful slashing arc, typically targeting the opponent's head, shoulder, or sword arm, generated by a combination of arm extension, wrist rotation, and body rotation from the saddle or standing position. [1] The curved blade geometry ensures that the cut draws across the target, increasing cutting efficiency compared to a straight blade. [1],[2] Military sabre cuts are classified by direction — horizontal, diagonal descending, diagonal ascending, and vertical — with each direction corresponding to a numbered cut in period manuals. [2],[3]
История и происхождение
Standard military sabre cuts were codified in European cavalry manuals, with Alfred Hutton's Cold Steel (1889) providing one of the most systematic treatments for both mounted and dismounted application. [1] The numbered cutting system was standardised across armies for efficient training of cavalry troopers. [2],[3]
Страна происхождения· показано в случайном порядке
- ГерманияHEMA
- ИталияHEMA
Эффективность
The standard military sabre cut is a fundamental downward or diagonal cutting action designed for combat effectiveness. [1]
Родословная
Standard military sabre cutting technique was taught in European military academies from the 18th century onward. [1]
Соревновательные результаты
Standard military sabre cuts are practised in HEMA military sabre competition events. [1]
Изображения
Изображений для этой техники пока нет.
Войдите, чтобы предложить изображение.
Биомеханический механизм
Primary Action — Cutting, thrusting, or striking with a bladed weapon — edge alignment and trajectory determine cutting effectiveness
Joints Involved — Wrists (edge alignment and rotation), elbows (extension for thrusts, chambering for cuts), shoulders (arc of the cut), hips (power generation)
Force Vector — Varies — downward diagonal cut (kesa-giri), horizontal cut (yoko-giri), thrust (tsuki), or rising cut (kiri-age)
Weapon Mechanic — Edge alignment (hasuji) is critical — the blade must travel along its cutting plane for effective cuts
Позиция и вход
From ready stance (chudan-no-kamae or equivalent) — Assume guard position, establish distance (ma-ai), execute the cut or thrust when an opening appears
From engagement distance — Use footwork to close to striking range, execute the technique with proper edge alignment (hasuji)
As counter — Wait for the opponent's attack, deflect or avoid, and counter-cut to the exposed target
Варианты
Standard cut — primary cutting angle from the ready stance
Thrust (tsuki) — straight thrust targeting the throat, chest, or face
Rising cut (kiri-age) — upward diagonal cut from low to high
Diagonal cut (kesa-giri) — downward diagonal cut following the kimono line
Видео
Infantry Sword Exercise Manual, 1817, by Henry Angelo
0
Standard Military Sabre Cut·Academy of Historical Fencing
A scan of this famous treatise is now available freely on our website - http://swordfight.uk/resources/ Henry Angelo'…
Longsword - 01- Introduction and Basics
0
Standard Military Sabre Cut·Historical Weapons Guild
1 / 2
3 videosЧто говорят инструкторы
The Standard Military Sabre Cut represents the foundational cutting technique codified in nineteenth-century European military sword practice. Academy of Historical Fencing documents the formal systematization of sabre cuts through Henry Angelo the Younger's 1817 Infantry Sword Exercise Manual, the first officially accepted British military standard for infantry swordsmanship on foot. Angelo's system, which remained the regulatory standard until the 1890s, employed numbered cuts and corresponding numbered parries for defensive responses, organizing cuts by position and providing structured training protocols—military instructors trained six hours daily for six weeks to master the system. The cuts themselves remained largely consistent with earlier Napoleonic period techniques popularized by Angelo's father's 1799 posters, though the 1817 manual introduced refined terminology and improved body mechanics instruction. Skallagrim's analysis emphasizes the biomechanical principles underlying sabre cuts: two-handed grip provides superior speed, precision in edge alignment, and enhanced directional control compared to single-handed execution, achieved through opposing hand pressures that enable rapid deceleration and redirection. Historical Weapons Guild's longsword instruction, while addressing a longer blade, reinforces core cutting principles applicable to sabre work: handshake grip positioning, vertical pulling mechanics driven by latissimus engagement rather than arm muscles, hip rotation for horizontal cuts, and the critical tactical concept of maintaining continuous motion through successive actions rather than committing to isolated cuts. Collectively, these instructors establish that military sabre cuts derive their effectiveness from structured body mechanics, grip discipline, and the integration of defensive positioning within offensive motion.
Сформировано на основе 3 инструкторов
- Academy of Historical Fencing — Infantry Sword Exercise Manual, 1817, by Henry Angelo: Documented the formal codification of military sabre cuts in Henry Angelo the Younger's 1817 manual, the first official British military standard for infantry sword exercise. Established that the manual's numbered cuts and parries system remained the regulatory standard until the 1890s, and that the cuts themselves derived from earlier Napoleonic techniques with refined terminology and body mechanics instruction.
- Skallagrim — Can You Use a Single-Handed Sword with TWO Hands?: Analyzed the biomechanical advantages of two-handed grip for sabre-type swords: increased power (approximately 1.5x), superior speed especially for feints, enhanced precision in edge alignment through dual points of contact, and improved directional control via opposing hand pressures enabling rapid deceleration and redirection.
- Historical Weapons Guild — Longsword - 01- Introduction and Basics: Established foundational cutting principles applicable to sabre technique: proper handshake grip positioning, vertical cutting mechanics driven by latissimus dorsi and back engagement rather than arm strength, hip rotation for horizontal cuts, and the tactical doctrine of continuous motion through successive actions rather than isolated committed cuts.
Изучить технику
Учебных курсов по этой технике пока нет.
Войдите, чтобы предложить курс.
Оценки
Риск травмы для человека, к которому применяется техника
9
Экстремальный9/10
Edged weapons cause fatal lacerations; historical battlefield mortality rates >30% (Amberger 1999)
Уровень мастерства, необходимый для надёжного выполнения техники
Продвинутый
Разрешена ли техника по основным соревновательным правилам
— FIE — Legal fencing technique — governed by FIE rules for...
FIE Rules of CompetitionPDFHEMA — Legal in historical fencing competition {src— various organizations
Заметки по тренировке
✓Standard military sabre cut execution: from the guard position, initiate the cut with a step and hip rotation, extend the arm along the cutting line, draw the blade through the target using the curve of the blade, and recover to guard (Hutton, The Swordsman, 1891)
✓Step 1: from guard, identify the target opening (head, cheek, flank, or chest)
✓Step 2: begin the moulinet — rotate the blade in a circle to build momentum for the cut
✓Step 3: step toward the target with the lead foot
✓Step 4: extend the arm along the cutting line — the blade travels edge-first toward the target
✓Step 5: contact the target with the belly of the curve and draw the blade through using a pulling motion
✓Step 6: follow through the cut and recover to guard immediately
✓The cut-recovery cycle should be smooth: cut, draw through, recover, ready for the next action
✓Drill: cut at a pell or suspended target — 10 cuts per angle, focusing on edge alignment and drawing action
Типичные ошибки
!Not initiating with the moulinet — the circular preparation builds the momentum needed for effective cutting
!Cutting without stepping — the step provides power and closes distance
!Extending the arm before rotating the hips — the hip rotation leads the cut; the arm follows
!Not drawing the blade through the target — the curved blade requires the pulling action for cutting efficiency
!Stopping on contact — the blade must travel through the target
!Not recovering to guard after the cut — the recovery is as important as the cut; immediate guard return prevents counter-attacks
!Practising only in the air — physical targets provide feedback on edge alignment and cutting mechanics
Связанные техники
Контрприёмы
Цепочка подготовки
1Assume Guard (Kamae/Hut) — take the appropriate ready position with the weapon
2Measure Distance (Ma-ai) — establish correct striking distance
3Initiate Cut/Thrust — execute the technique with proper edge alignment or point control
4Follow Through (Zanshin) — maintain awareness and readiness after the technique
Источники и ссылки
Основной источник
The Art of Fencing (Luigi Barbasetti, 1932)
1КнигаThe Book of Five Rings (Musashi, 1645)
Alias sources — [1] Cold Steel (Hutton, 1889) [2] Hoplology (Burton, 1884) [3] Hoplology (Burton, 1884)
2КнигаThe Art of Fencing (Barbasetti, 1932)
Effectiveness sources — [1] The Martial Arts of Renaissance Europe (Anglo, 2000)
3ДругоеJapanese Martial Arts Hybrid Terminology
Mixed Japanese-Western terminology — combines traditional Japanese terms with katakana loanwords
4ЦитатаThe Book of Five Rings (Musashi, 1645)
Alias sources — [1] Cold Steel (Hutton, 1889) [2] Hoplology (Burton, 1884) [3] Hoplology (Burton, 1884)
5ЦитатаThe Art of Fencing (Barbasetti, 1932)
Effectiveness sources — [1] The Martial Arts of Renaissance Europe (Anglo, 2000)
Сообщество
Атлетизм
Requires
wrist control for edge alignment, grip endurance, footwork precision
Favours
quick wrists, strong forearms, good posture
Key muscles
forearm extensors/flexors, deltoids, core, calves
Часто задаваемые вопросы
What are the advantages of using two hands on a single-handed sword?
According to Skallagrim, using two hands gives you more power and speed in your cuts, and provides a sturdier defense when parrying—if an opponent's attack is too strong to block with one hand alone, the supporting hand prevents your guard from collapsing.
What's the main disadvantage of gripping a sword with two hands instead of one?
Skallagrim emphasizes that you significantly shorten your effective reach; with two-hand support, you must position both hands close enough that you lose the distance you'd have with a single-handed grip, potentially missing targets your opponent can still evade.
Should I move my arms or hips first when executing a cut?
According to the Historical Weapons Guild, when stepping forward to cut, your arms must go first and be powered and structured to move through everything else; your feet follow after, establishing the proper tempo and timing for an effective strike.
How should I move my body differently for vertical versus horizontal cuts?
The Historical Weapons Guild explains that for vertical cuts, you move your shoulders and engage your back; for horizontal cuts, you keep your arms straight and move purely from your hips, and when combining both actions, everything works together from your core.
Как работает Standard Military Sabre Cut?
The Standard Military Sabre Cut delivers the curved blade's edge in a powerful slashing arc, typically targeting the opponent's head, shoulder, or sword arm, generated by a combination of arm extension, wrist rotation, and body rotation from the saddle or standing position. The curved blade geometry ensures that the cut draws across the target, increasing cutting efficiency compared to a straight blade.
Откуда происходит Standard Military Sabre Cut?
Standard military sabre cuts were codified in European cavalry manuals, with Alfred Hutton's Cold Steel (1889) providing one of the most systematic treatments for both mounted and dismounted application. The numbered cutting system was standardised across armies for efficient training of cavalry troopers.
Разрешён ли Standard Military Sabre Cut на соревнованиях?
FIE: разрешён — Legal fencing technique — governed by FIE rules for foil, épée, and sabre; HEMA: разрешён — Legal in historical fencing competition
Насколько опасен Standard Military Sabre Cut?
Оценка опасности 9/10. Extreme — edged weapons cause fatal lacerations; historical battlefield mortality rates >30% (Amberger 1999)
Как подготовить Standard Military Sabre Cut?
Стандартная цепочка подготовки: Assume Guard (Kamae/Hut) → Measure Distance (Ma-ai) → Initiate Cut/Thrust → Follow Through (Zanshin).
Как защититься от Standard Military Sabre Cut?
Стандартные контрприёмы: Parry (Absetzen) — deflect the incoming blade with a counter-displacement / Void (Step Back) — withdraw from measure to avoid the cutting arc / Counter-Cut (Nachreisen) — strike into the opponent's opening during their attack.
Какие есть варианты Standard Military Sabre Cut?
Распространённые варианты: Standard cut (primary cutting angle from the ready stance); Thrust (tsuki) (straight thrust targeting the throat, chest, or face); Rising cut (kiri-age) (upward diagonal cut from low to high); Diagonal cut (kesa-giri) (downward diagonal cut following the kimono line).
Насколько эффективен Standard Military Sabre Cut на соревнованиях?
Standard military sabre cuts are practised in HEMA military sabre competition events.
Какие типичные ошибки при выполнении Standard Military Sabre Cut?
Основные ошибки, на которые стоит обратить внимание: Not initiating with the moulinet — the circular preparation builds the momentum needed for effective cutting / Cutting without stepping — the step provides power and closes distance / Extending the arm before rotating the hips — the hip rotation leads the cut; the arm follows / Not drawing the blade through the target — the curved blade requires the pulling action for cutting efficiency.
Какие ещё названия есть у Standard Military Sabre Cut?
Standard Military Sabre Cut также известен как Sutandādo Guntō Kiri, Molinello, Standard Cavalry Slash, Basic Sabre Cut.