Longsword Techniques: ZornhauWinden Duplieren Mutieren
0
Zornhau·Adelaide Sword Academy
taken from jan 2011 training. We have since moved back to a zornhau that "punches" out more and clears the centre line, …
Перевод: zornhau (wrath cut)
Дистанция и классификация
Дистанция
БлижняяСредняяДальняя
Обзор
The Zornhau (wrath cut) is the first and most important of Liechtenauer's five master cuts — a powerful diagonal descending cut from the dominant shoulder to the opponent's opposite side, delivered with an aggressive step forward. [1] The Zornhau is not simply a strong cut; it is designed to simultaneously attack the opponent and displace their incoming cut by crossing their blade en route to the target. [1],[2] From the Zornhau bind (where the swords cross), the fencer transitions into winding, thrusting, or further cutting based on the opponent's reaction. [2],[3]
История и происхождение
The Zornhau is the first master cut described in the Liechtenauer tradition, glossed extensively by Ringeck, von Danzig, and other commentators as the gateway to understanding the entire system. [1] Ringeck writes that the Zornhau 'breaks' all other cuts, making it the foundation of German longsword. [2],[3]
Страна происхождения· показано в случайном порядке
- ГерманияHEMA, Немецкий длинный меч
- ИталияHEMA
Эффективность
The Zornhau (Wrath Cut) is the first and most important of the five Meisterhäue (master cuts) in Liechtenauer's tradition. [1] It is a powerful diagonal descending cut from the right shoulder that simultaneously strikes and displaces the opponent's blade if they attack with a similar cut — Liechtenauer's texts state that the Zornhau 'breaks' all Oberhäue (upper cuts). [2] Its effectiveness lies in its dual function as both attack and defence: when executed against an incoming cut, it creates a bind (Winden position) from which the fencer can immediately thrust, wind, or displace. [3]
Родословная
The Zornhau is documented in the earliest known Liechtenauer gloss (MS 3227a, c. 1389) and in all subsequent Liechtenauer-tradition manuscripts, including Sigmund Ringeck's, Peter von Danzig's, and Pseudo-Peter von Danzig's commentaries. [1] It is the opening technique of the Zettel and the foundation upon which the other four master cuts are built. [2]
Соревновательные результаты
The Zornhau and its derivative the Zornhau-Ort (Wrath Cut Thrust) are among the most frequently observed techniques in HEMA longsword tournaments, used as both opening attacks and counters. [1]
Изображения
Изображений для этой техники пока нет.
Войдите, чтобы предложить изображение.
Биомеханический механизм
Primary Action — Cutting, thrusting, or striking with a bladed weapon — edge alignment and trajectory determine cutting effectiveness
Joints Involved — Wrists (edge alignment and rotation), elbows (extension for thrusts, chambering for cuts), shoulders (arc of the cut), hips (power generation)
Force Vector — Varies — downward diagonal cut (kesa-giri), horizontal cut (yoko-giri), thrust (tsuki), or rising cut (kiri-age)
Weapon Mechanic — Edge alignment (hasuji) is critical — the blade must travel along its cutting plane for effective cuts
Позиция и вход
From ready stance (chudan-no-kamae or equivalent) — Assume guard position, establish distance (ma-ai), execute the cut or thrust when an opening appears
From engagement distance — Use footwork to close to striking range, execute the technique with proper edge alignment (hasuji)
As counter — Wait for the opponent's attack, deflect or avoid, and counter-cut to the exposed target
Варианты
Standard cut — primary cutting angle from the ready stance
Thrust (tsuki) — straight thrust targeting the throat, chest, or face
Rising cut (kiri-age) — upward diagonal cut from low to high
Diagonal cut (kesa-giri) — downward diagonal cut following the kimono line
Видео
Learn the Art of Combat: Longsword Guards - Beginners Guide
0
Zornhau·Björn Rüther
Knowing the guards in the long sword, knowing which techniques and concepts to apply from each posture, and being able t…
Drills for the Zornhau/Centerline
0
Zornhau·SuperiorHEMA
90% may be an exaggeration but when the swords contact and the points are still in play then you'll be choosing somethin…
1 / 2
3 videosЧто говорят инструкторы
The Zornhau (wrath cut) is foundational to Liechtenauer longsword technique and represents a centerline-focused offensive and defensive cut whose principles encompass approximately 90% of typical exchanges, according to SuperiorHEMA. The technique is executed as a broad diagonal cut that crosses and controls the opponent's sword while activating hip drive; it can be performed extended into long point or retracted into a hanging guard depending on distance and context. SuperiorHEMA emphasizes that the Zornhau functions both offensively—as an initial attack taking the centerline—and defensively, as a counter-cut or response to an opponent's aggression. Practitioners should maintain extended arms and diagonal alignment throughout. The cut can transition into thrusts, windings into the upper guard, or follow-up cuts to alternate sides (umschlag or striking around) when the initial line is disrupted. Björn Rüther contextualizes the Zornhau within Meijer's 16th-century guard system, noting it as a principal strike executable from multiple guards including the upper guard, ox, plow, and fool, with transitions flowing through positional changes that maintain offensive threat. All three instructors implicitly agree on the technique's importance and versatility, though SuperiorHEMA provides the most detailed progressive drill methodology, while Rüther emphasizes historical guard integration and Adelaide Sword Academy's contribution focuses on contextual combinations with winden, duplieren, and mutieren sequences.
Сформировано на основе 3 инструкторов
- Adelaide Sword Academy — Longsword Techniques: Zornhau Winden Duplieren Mutieren: Establishes Zornhau as the foundational technique within a sequence of advanced combinations including winden, duplieren, and mutieren.
- Björn Rüther — Learn the Art of Combat: Longsword Guards - Beginners Guide: Contextualizes Zornhau as a principal strike executable from the four main guards and transitions, emphasizing Meijer's historical framework and guard-based structure.
- SuperiorHEMA — Drills for the Zornhau/Centerline: Provides comprehensive technical analysis of Zornhau as a centerline-controlling cut, detailing mechanics (hip activation, arm extension, diagonal movement), multiple response scenarios (hard parries, counter-cuts, centerline loss), and progressive drill methodology from stationary to 3D free-play.
Изучить технику
Учебных курсов по этой технике пока нет.
Войдите, чтобы предложить курс.
Оценки
Риск травмы для человека, к которому применяется техника
9
Экстремальный9/10
Edged weapons cause fatal lacerations; historical battlefield mortality rates >30% (Amberger 1999)
Уровень мастерства, необходимый для надёжного выполнения техники
Продвинутый
Разрешена ли техника по основным соревновательным правилам
— Traditional martial arts — Practiced in traditional kata/...
— IWUF — Legal in wushu taolu if applicable
IWUF Competition RulesPDFHEMA — Legal in applicable historical weapon categories {src— various organizations
Заметки по тренировке
✓The Zornhau (wrath cut) is the most fundamental master cut in Liechtenauer's longsword system — a powerful diagonal descending cut that simultaneously attacks and displaces the opponent's sword (Tobler, Fighting with the German Longsword, 2004)
✓The Zornhau launches from Vom Tag: a diagonal cut from the right shoulder to the opponent's left side, cutting through the opponent's attack line
✓The Zornhau is designed to counter Vom Tag: when the opponent raises their sword to cut, the Zornhau cuts through their line first
✓The Zornhau Ort (wrath cut point): after the Zornhau, the sword naturally winds into a thrust at the opponent's face — the cut transitions seamlessly to the thrust
✓Ringeck's gloss states: 'The Zornhau breaks all cuts from above' — it is the master technique against overhead attacks
✓The Zornhau teaches the fundamental principle of German longsword: cut through the opponent's attack rather than parrying then cutting
✓The Zornhau is the first technique taught to longsword students: its mechanics embody the core principles of the system
Типичные ошибки
!Cutting too wide with the Zornhau — the cut should travel through the centreline, not sweep around the body
!Not following the Zornhau with the Ort (thrust) — the natural follow-up thrust must be drilled as part of the technique
!Using the Zornhau as a committed single attack — it is the beginning of a sequence, not a standalone technique
!Cutting without edge alignment — the edge must be aligned with the direction of the cut for effectiveness
!Not stepping with the Zornhau — the cut requires a passing step to generate power and close distance
!Raising the sword too high before the cut — excessive wind-up telegraphs the attack
!Treating the Zornhau as only offensive — it simultaneously deflects the opponent's sword while cutting
Связанные техники
Контрприёмы
Цепочка подготовки
1Assume Guard (Kamae/Hut) — take the appropriate ready position with the weapon
2Measure Distance (Ma-ai) — establish correct striking distance
3Initiate Cut/Thrust — execute the technique with proper edge alignment or point control
4Follow Through (Zanshin) — maintain awareness and readiness after the technique
Источники и ссылки
Основной источник
The Art of Combat (Joachim Meyer, 1570)
1КнигаThe Book of Five Rings (Musashi, 1645)
Alias sources — [1] Sigmund Ringeck's Knightly Arts of Combat [2] Sigmund Ringeck's Knightly Arts of Combat [3] Sigmund Ringeck's Knightly Arts of Combat
2КнигаThe Art of Fencing (Barbasetti, 1932)
Effectiveness sources — [1] Forgeng, J., The Art of Combat (Palgrave Macmillan, 2003) [2] Tobler, C., In Saint George's Name (Freelance Academy Press, 2010) [3] Tobler, C., Fighting with the German Longsword (Freelance Academy Press, 2004)
3ДругоеJapanese Combat Sports Katakana Convention
Standard katakana transliteration of Western martial arts terminology (外来語) — used in Japanese MMA, boxing, and BJJ communities
4ЦитатаThe Book of Five Rings (Musashi, 1645)
Alias sources — [1] Sigmund Ringeck's Knightly Arts of Combat [2] Sigmund Ringeck's Knightly Arts of Combat [3] Sigmund Ringeck's Knightly Arts of Combat
5ЦитатаThe Art of Fencing (Barbasetti, 1932)
Effectiveness sources — [1] Forgeng, J., The Art of Combat (Palgrave Macmillan, 2003) [2] Tobler, C., In Saint George's Name (Freelance Academy Press, 2010) [3] Tobler, C., Fighting with the German Longsword (Freelance Academy Press, 2004)
Сообщество
Атлетизм
Requires
wrist control for edge alignment, grip endurance, footwork precision
Favours
quick wrists, strong forearms, good posture
Key muscles
forearm extensors/flexors, deltoids, core, calves
Часто задаваемые вопросы
What should I focus on when drilling the Zornhau?
Timing becomes increasingly important, and you'll notice if your structure is poor because it will impact your sword. Keep your arms extended, maintain the diagonal cut, and always keep your movement multiple choice.
What do I do if my opponent parries my Zornhau hard and takes the centerline?
Wind into your upper hanging, bringing your strong to their weak, and thrust. When both points remain centered after a hard parry, a straight thrust will deviate and cutting around becomes very unsafe, making the winding counter-thrust the safer option.
Why should I avoid changing guards randomly?
Never change your guard without an idea or intention behind it, otherwise your opponent will have many more options to attack the openings you create while you're foolishly spinning around.
Как работает Zornhau?
The Zornhau (wrath cut) is the first and most important of Liechtenauer's five master cuts — a powerful diagonal descending cut from the dominant shoulder to the opponent's opposite side, delivered with an aggressive step forward. The Zornhau is not simply a strong cut; it is designed to simultaneously attack the opponent and displace their incoming cut by crossing their blade en route to the target.
Откуда происходит Zornhau?
The Zornhau is the first master cut described in the Liechtenauer tradition, glossed extensively by Ringeck, von Danzig, and other commentators as the gateway to understanding the entire system. Ringeck writes that the Zornhau 'breaks' all other cuts, making it the foundation of German longsword.
Разрешён ли Zornhau на соревнованиях?
Traditional martial arts: разрешён — Practiced in traditional kata/forms and weapon-specific competition under var…; IWUF: разрешён — Legal in wushu taolu if applicable; HEMA: разрешён — Legal in applicable historical weapon categories
Насколько опасен Zornhau?
Оценка опасности 9/10. Extreme — edged weapons cause fatal lacerations; historical battlefield mortality rates >30% (Amberger 1999)
Как подготовить Zornhau?
Стандартная цепочка подготовки: Assume Guard (Kamae/Hut) → Measure Distance (Ma-ai) → Initiate Cut/Thrust → Follow Through (Zanshin).
Как защититься от Zornhau?
Стандартные контрприёмы: Parry (Absetzen) — deflect the incoming blade with a counter-displacement / Void (Step Back) — withdraw from measure to avoid the cutting arc / Counter-Cut (Nachreisen) — strike into the opponent's opening during their attack.
Какие есть варианты Zornhau?
Распространённые варианты: Standard cut (primary cutting angle from the ready stance); Thrust (tsuki) (straight thrust targeting the throat, chest, or face); Rising cut (kiri-age) (upward diagonal cut from low to high); Diagonal cut (kesa-giri) (downward diagonal cut following the kimono line).
Насколько эффективен Zornhau на соревнованиях?
The Zornhau and its derivative the Zornhau-Ort (Wrath Cut Thrust) are among the most frequently observed techniques in HEMA longsword tournaments, used as both opening attacks and counters.
Какие типичные ошибки при выполнении Zornhau?
Основные ошибки, на которые стоит обратить внимание: Cutting too wide with the Zornhau — the cut should travel through the centreline, not sweep around the body / Not following the Zornhau with the Ort (thrust) — the natural follow-up thrust must be drilled as part of the technique / Using the Zornhau as a committed single attack — it is the beginning of a sequence, not a standalone technique / Cutting without edge alignment — the edge must be aligned with the direction of the cut for effectiveness.
Какие ещё названия есть у Zornhau?
Zornhau также известен как Tsorunhau, Wrath Cut, Zorn-Haw, Anger Strike.